Large Capacity Dual Track Reflow Oven HC-RF800A-II
■ 8 Zones Design (8 upper 8down)
■ PID Close Loop Control + SSR Driving
■ Nitrogen Option Available
This Dual Rail Reflow Oven is designed for high-efficiency SMT production lines requiring parallel processing and balanced throughput. Dual-lane speed control supports different PCB sizes or separate product models running simultaneously.
Ideal for consumer electronics, LED boards, controllers, and multi-size PCB lines.
SPECIFICATIONS
| Model | HC-RF800A-II | ||
| Machine Dimension | 5350*1600*1500MM | Machine Weight | 2850KGS |
| Heating Zones | Top 8 / Bottom 8 | Heating Zones Length | 3390MM |
| Colling Zones | Top 2 Bottom 2 by air blower | Power Supply | 5-Wire 3-Phase 380V 50/60Hz |
| Total Power | 75KW | Starting Power | 35KW |
| Normal Operating Power | 11KW | Heating Up Time | About 20 minutes |
| Colling Method | Forced-Air (Optional: Water Chiller) | Heating Method | Full Hot Air from Top and Bottom |
| Temperature Control Precision | ±1.0℃ | Temperature Deviation on PCB | ±1.5℃ (By MR Board Test Standard) |
| Temperature Control Method | PID Close Loop Control + SSR Driving, monitored by Siemens PLC + PC | Abnormal Alarm | Abnormal Temperature (Extra-high/Extra-low Temp.) |
| Conveyor Height | 900±20MM | Conveyor Speed Range | 300~2000MM/Min |
| Quantity of Guide Rail | Dual Lane | Temp. Setting Range | Room Temp. ~300℃ |
| Max. Width of PCB (Single Lane Mode) | 520MM | Max PCB Width (Dual Lane Total) | 2*280MM |
| Conveyor Direction | Left → Right ( Optional : Right → Left) |
Components Clearance | Top / Bottom Clearance of PCB is 25MM |
| Lubrication Auto-afflux | Standard | Temp. Thermocouple Slot | Standard |
| Driven Top Hood Opening | Standard | On-line Editing | Standard |
| Transmission Method | Air Reflow (Chain + Mesh); N2-Reflow（Chain), Mesh is optional; | ||
| Model for Nitrogen System (Optional) | |||
| Electric Power Required | 67KW | Starting Power | 32KW |
| Normal Operating Power | 12KW | Oxygen Analyzer | Optional |
| Nitrogen Flow Meter | Standard | Flux Reclaim System | Standard |
| Nitrogen Protection System | Standard | Nitrogen Consumption | 20M³/hr. 300ppm~1000ppm |
| Flux Management System | Flux Reclaimed and Filtration standard for N2 Oven, | Water Chiller | External Stand-alone Type |
Contact Us
If you are planning to build or upgrade your SMT/THT production line, our engineering team can provide a free layout design, equipment configuration, and quotation within 24 hours.
Get In Touch
Chenzhou Heech Electronic Equipment Co.,Ltd
- Building 11, 2nd Industrial Zone of Songgang, Bao’an District, Shenzhen , Guangdong.
- serena.deng@heechsmt.com
- +86 15773596026
- 15773596026
