Dual-Wave Lead-Free Wave Soldering Machine HC-WS300
■ 3 Preheating Zones (3 IR)
■ Precision Dual-Wave Control
■ Intelligent Control System Siemens PLC+PC
The wave soldering machine HC-WS300 with a 300mm solder width, suitable for small to medium THT production lines. It delivers stable thermal performance and high-quality soldering for consumer electronics, power boards, and LED assemblies.
SPECIFICATIONS
| Model | HC-WS300 | ||
| Machine Dimension | 3600*1250*1650MM | Machine Weight | 2000KGS |
| Control System | Siemens PLC + PC | Starting Power | 22.5 KW |
| Power Supply | 5-Wire 3-Phase 380V/220V 50Hz 63A | Normal Operating Power | 8 KW |
| Spray System | |||
| Transmission method | Stepper Motor | Flux Flow | 10-100mm/min |
| Spray Pressure | 0.25-0.4MPA | Auto Fill Flux | Automatic |
| Exhaust Ducting Diameter | Ø200MM | Exhaust Capacity | 25M³/Min |
| Exhaust Method | Up & Down Exhaust | ||
| Preheating System | |||
| Preheating Mode | Infrared (Optional: Hot Air) | Preheating Zone Number | 3 |
| Control Mode | PID + SSR | Preheating Length | 1200MM |
| Preheating Temp. | Room Temperature-250℃ | Warm-up Time | Approx.15min (Setting 150℃) |
| Conveyor System | |||
| PCB Width (L X W) (MM) | Min: 80×60, Max: 400x300mm | Conveyor Speed Control Mode | Speed Regulator |
| Conveyor Direction | L → R (Optional R→ L) | Conveyor Speed Range | 0~2000MM/Min |
| Finger | Quick-change Finger (Standard) | Conveyor Width Control | Manual |
| Conveyor Height | 750±20MM | Conveyor Angle | 4°-7° |
| Component Height | Top 120MM (Optional: 160MM), Bottom 15MM | ||
| Soldering System | |||
| Solder Pot Material | Full Titanium | Solder Pot Max Temperature | 300℃ |
| Wave Height Adjust | Motorized, 0-15mm, Inverter Controlled | Solder Pump Drive | 2 × 1/2 HP, 3P, 220 VAC |
| Solder Pot Capacity | 250-350 KGS | Heater Power | 380VAC 6KW |
| Temperature Control Mode | PID+SSR | Solder Wave Type | Dual Wave |
| Solder-pot Warm-up Time | Approx.180min (Setting 250℃) | Solder Pump Type | Motor Drive |
| Colling System | |||
| Colling Method | Forced Air | ||
| Other | |||
| Finger Cleaning System | Brush | ||
Contact Us
If you are planning to build or upgrade your SMT/THT production line, our engineering team can provide a free layout design, equipment configuration, and quotation within 24 hours.
Get In Touch
Chenzhou Heech Electronic Equipment Co.,Ltd
- Building 11, 2nd Industrial Zone of Songgang, Bao’an District, Shenzhen , Guangdong.
- serena.deng@heechsmt.com
- +86 15773596026
- 15773596026
